SBKJ

Showing 1 - 10 of 10, total 1 pages [First] [Previous] [Next] [Last]

elbow making machine sbwt-1000
Specification: 1
Detail: Max. Thickness 1.2mm Raw material &©|160; cold rolled sheet galvanized steel Diameter range ¡é150-¡é1000mm Rotating speed of driver 7 r/min Motor Power 1.5kw¡Á2 Net weight 750kg

elbow making machine sbem-1250
Specification: 1
Detail: Electrical 380V/3PH/50Hz Total power 5KW Hydraulic oil 55 L Consumption of compressed air 75L/hour 6har Max. forming speed 120m/min Diameter range ¡é125-¡é1250mm Net weight 750kg Material (Thickness ) mm Black steel...

tdf flange forming machine
Specification: 1
Detail: TDF unit is one of the two universal flange making systems in the world, with low cost, weld-seal and easy-fabrication, specially suitable to produce a duct with medium section area and applied in large-scale industrial manufa...

tdc flange forming machine
Specification: 1
Detail: TDC unit is one of the two universal flange making systems in the world. It can save time and material drastically with its well-seal, strong and durable joint structure. So it is especially suitable for producing a duct with ...

aluminum flexible duct forming machine
Specification: 1
Detail: Type SBLR-600-C Diameter ¡Ó100-¡Ó500mm Thickness 0.025-0.03mm Suitable Material Aluminum, non-woven fabric, PVC Strip Width 50-60mm Feeding speed 60m/min Forming speed Up to 10m/min Main power 1.5kw Working temperatur...

aluminum duct forming machine sblf-300-b
Specification: 1
Detail: Diameter ¡é80---¡é500mm Length 100---4000mm Material Thickness 0.06---0.15mm(Aluminum foil strip) Raw material width 60mm Compression ratio 1:3.5 (means make the 3.5m tube to 1m) Surface corrugation 7 corrugation L...

spiral tubeformer sbtf-1500d
Specification: 1
Detail: Diameter range ¦µ80-¦µ1500mm Tube Length 120-8000mm Thickness of Strip 0.4-1.2mm Width of Strip 137-140mm Strip Speed 1-38/min Lockseam Outside tube,on the inside on request Control System PLC automatic control C...

spiral tubeformer sbtf-1602
Specification: 1
Detail: Diameter range 80 ¨C 1600mm Thickness of strip 0.4 -1.3mm Glvanized steel 0.8mm Sinless steel 0.4-1.2mm Auminum Strip Width standard 137mm up to 1mm thickness, 140mm above. Other widths on request. Lockseam Outs...

spiral tubeformer sbtf-2020
Specification: 1
Detail: Diameter range 80 - 2500 mm Strip thickness Galvanized Steel 0.4 - 2.0 mm Stainless Steel 0.4 - 1.3 mm Aluminium 0.4 - 2.0 mm Strip width 137 mm 0.4 - 1.0 mm 140 mm 1.1 ...

oval tube forming machine
Specification: 5000/1100/1200
Detail: Maximum Sheet Thickness 1.25 mm Maximum Duct Length 3000 mm Basic Circular Duct Diameter 330 mm - 2000 mm Flat Oval Sizes 150 x 435 mm - 915 x 2650 mm Power Consumption 18.75 KW Floor ***ce (Approx.) - Machine 5.4 x 1 m...


Showing 1 - 10 of 10, total 1 pages [First] [Previous] [Next] [Last]
1